Connection to STEP/iMX

From Neuromeka Wiki
Jump to: navigation, search


Booting STEP/iMX

  • Connect USB-RS232 cable to COM1 port of STEP/iMX and plug usb terminal to the host PC. Wait for the host recognize the cable and show the COM port number, remember this this number (x)
  • Connect Ethernet port of STEP/iMX to host.
Back panels of STEP/iMX

Back panels of STEP/iMX

Turning on STEP/iMX

  • STEP/iMX does not has power button, in order to turn it one, connect 12V adapter head to the machine.

Connection to STEP/iMX

Connection by COM port console (using COM1)

  • Since there is no monitor connected, you can monitor STEP/iMX by PuTTY.
  • Run putty, choose Serial connection type, input the COMx as Serial line (x is the actual COM number of USB-RS232 cable on the host), tag any name for this connection, Save and Open the connection.
  • Watch the booting process in putty terminal. Log in with id/password: ubuntu/nrmk2013 or root/root
Putty com

PuTTY setting for STEP/iMX COM console


Connection by Ethernet static IP

  • Ethernet port is configured to have the static IP of 192.168.137.10.
  • Configure the Ethernet port of host as static IP with same IP range
Host-lan

Configure the host Ethernet

  • The STEP/iMX connected by this port from a host can be accessed by this static IP, e.g. in PuTTY.
PuTTY_STEPiMX_Static

PuTTY for STEP/iMX statically configured Ethernet

  • Check the connection by ping command in putty: ping 192.168.137.1.
Putty-ping

Check the lan connection