IGoT Multitab Application (Eng)

From Neuromeka Wiki
Jump to: navigation, search


Igot multitab app eng 001 new.png

  • Setting the certification number
- To connect to a IGoT, It requires serial number authentication.
- After click 'QR Code' button, Scan QR Code that was attached to product case.
- Click 'Set' button.


Igot multitab app eng 002.png

  • Connecting to IGoT
- Select IGoT that want in bluetooth list, and click 'Connect' button.
- If you can't find it in list, move to closer position with IGoT, and click 'Scan' button again.


Igot multitab app eng 003.png

  • Complete to connection & Authorization.
- User can use IGoT after finishing authorization process.
- IGoT information that is certificated finally is saved to smart device.
- When you run application, if saved IGoT device is searched in bluetooth list, it try to connect automatically.


Igot multitab app eng 004.png

  • Start screen
- It shows information of 5 sockets of IGoT multitab No.1.
- If you drag the right button of the No. 1st & 2nd socket screen to the left, it is converted to the data screen.


Igot multitab app eng 005.png

  • Socket data
- Power / cumulative energy/ current / voltage of the 1st & 2nd socket can be confirmed in real time.


Igot multitab app eng 006.png

  • Socket ON / OFF
- The user can change remotely power ON / OFF state of the 1~4 th socket.
- 5th socket power always maintains the ON state, and can not be controlled remotely.
- Touch the socket image while 1~2 seconds.


Igot multitab app eng 007.png

  • Multi tab list
- Click 'multi tab list' button of menu of located left-top.
- It shows all connected multi tab to IGoT.
- If you click 'Load' button after selecting IGoT multi tab that want, you can use the it.


  • 실행 영상