IGoT Remote Controller Application (Eng)

From Neuromeka Wiki
Jump to: navigation, search

Igot remocon app eng 001 new.png

  • Setting the certification number
- To connect to a IGoT remote control, It requires serial number authentication.
- After click 'QR Code' button, Scan QR Code that was attached to product case.
- Click 'Set' button.

Igot remocon app eng 002.png

  • Connecting to IGoT Remote Controller
- Select IGoT remote controller that want in bluetooth list, and click 'Connect' button.
- If you can't find it in list, move to closer position with IGoT remote controller, and click 'Scan' button again.

Igot remocon app eng 003.png

  • Complete to connection & Authorization.
- User can use IGoT remote controller after finishing authorization process.
- IGoT remote controller information that is certificated finally is saved to smart device.
- When you run application, if saved IGoT remote controller device is searched in bluetooth list, it try to connect automatically.

Igot remocon app eng 004.png

  • Menu
- If you drag button that located on left-lower to the right, it is switched to menu screen.

Igot remocon app eng 005.png

  • Select the device model
- Basically 3 virtual remote control model (TV / air conditioning / fan) has been saved.
- Click the 'Add' button, it is possible to generate a new virtual remote control.
- The application provides 4 virtual remote controller model (TV / air conditioning / fan / normal type).
- When you click the 'Delete' button after selecting a virtual remote controller of the user list, the data stored in the IGoT remote control is deleted.
- When you click the 'Load' button after selecting a virtual remote controller in user list, it is possible to use the remote controller.

Igot remocon app eng 006.png

  • Running mode
- Virtual remote controller that is loaded is started running mode.
- In the running mode, virtual remote controller can be used like a real thing using the virtual button is registered.
- To work the virtual buttons in the running mode, each virtual button should be trained.
- Click 'Learning' button in bottom.

Igot remocon app eng 007.png

  • Renaming
- If you touch name area of virtual remote controller, you can change to name that want.

Igot remocon app eng 008.png

  • Learning mode
- If you click 'Learning' button of bottom, it is changed to learning mode.
- In learning mode, you can register real remote controller buttons to virtual remote controller buttons.
- Click virtual button to register.

Igot remocon app eng 009.png

  • Learning mode
- If IGoT remote controller receive virtual button value, click real remote controller button.

Igot remocon app eng 010.png

  • Learning mode
- If IGoT remote controller receive real button value, registration is completed and the virtual button become to enable.
- User can progress learning continually by repeating this process.
- If user complete all learning of virtual buttons, return to running mode by clicking 'Running' button.

  • 실행 영상