IGoT Setting Application (Eng)

From Neuromeka Wiki
Jump to: navigation, search


Igot setting app eng 001 new.png

  • Setting the certification number.
- To connect to a IGoT remote control, It requires serial number authentication.
- After click 'QR Code' button, Scan QR Code that was attached to product case.
- Click 'Set' button.


Igot setting app eng 002.png

  • Connecting to IGoT
- Select IGoT that want in bluetooth list, and click 'Connect' button.
- If you can't find it in list, move to closer position with IGoT, and click 'Scan' button again.


Igot setting app eng 003.png

  • Complete to connection & Authorization
- User can use IGoT after finishing authorization process.
- IGoT data that is certificated finally is saved to smart device.
- When you run application, if saved IGoT device is searched in bluetooth list, it try to connect automatically.


Igot setting app eng 004.png

  • Select the WiFi
- It shows current WiFi list.
- Select WiFi item for sending to IGoT, and click 'Select' button.


Igot setting app eng 005.png

  • Transmitting WiFi information
- Enter password of selected WiFi.
- If the WiFi doesn't have password, enter nothing.
- Click 'Transmit' button.


Igot setting app eng 006.png

  • Complete to transmission of WiFi information
- If transmitting of WiFi information is completed, 'Reset' button become to enable state.
- Click 'Reset' button.


Igot setting app eng 007.png

  • Request a reset of network information
- Request a "reset" command.


Igot setting app eng 008.png

  • Reset network information
- Network information of IGoT is reset.
- IGoT will attempt to connect by received wifi address. it takes time of about 1 minute.


  • Movie