SensorCape

From Neuromeka Wiki
Jump to: navigation, search


IGoT - SensorCape

1. SensorCape KIT SPEC

◈ Available sensor interface
  • I2C : 1 port
  • 1-Wire : 1 port
  • UART: 1 port
  • GPIO : 2 port (only one port is available to use power source)
◈ Line connection : RJ12 6P4C
◈ Power source
  • Input : 5V from BeagleBone Black
  • Output : 3.3V, 5V (Output power source for each ports can be selected by jumper socket)

2. SensorCape KIT COMPONENT MAP

Sensorcape component map1.png


3. 제품구성

◈ IGoT/Sensor Cape
  • IGoT/Sensor Cape 1ea

Sensorcape.png


◈ IGoT/Sensor Basic Kit
  • IGoT/Sensor Basic Kit 1set
    • Temperature sensor (DS18B20 - 1ea)
    • Humidity sensor (HTU21 - 1ea)
    • Luminance sensor (BH1750 - 1ea)
    • PIR sensor (SR501 - 1ea)
    • Cablecoupler(1ea)
    • RJ12 cable(5ea) (Direct) : cross(X), only Direct

Sensorcape basic.png


◈ IGoT/Sensor Beginner Kit
  • IGoT/Sensor Beginner Kit 1set
    • Temperature sensor (DS18B20 - 1ea)
    • Luminance sensor (BH1750 - 1ea)
    • PIR sensor (SR501 - 1ea)
    • RJ12 cable(3ea) (Direct) : cross(X), only Direct

Sensorcape beginner.png


4. Sensor 상세정보

Sensors information1.png


5. BeagleBoneBlack(별매) 장착

Sensorcape install onBBB.png


6. 동영상

◈ Sensorcape + BeagleBoneBlack + Sensors 조립 영상

◈ Thing+를 이용한 Sensor TEST 영상