Zigbee setting

From Neuromeka Wiki
Jump to: navigation, search
BB-Air


Using Zigbee on BB-Air

  • Confirm /dev/*ACM*
ls /dev/*ACM*

Dev.png

  • Open the minicom
minicom -s


  • Enter Serial port setup fo minicom.

Minicom setting1.png

  • Change Serial Device and Bps/Par/Bits
  • Serial Device : /dev/ttyACM0
  • Bps/Par/Bits : 115200 8N1

Minicom setup zig.png

  • Enter the Exit.

Minicom setting.png

  • Enter zigbee setting mode
+++

Zigbee1.png

  • Enter zigbee setting mode
atif

Zigbee atif.png

  • Enter zigbee setting mode
atex

Zigbee atex.png


Using Out PIN

  • Connect to PL2303(External RS232 Converter)


01 Connect to ZB.png

  • Open the PuTTY
Serial line : COM@
Speed : 115200


00 Connect PUTTY.png

  • Write the Command


02 Command ZB.png